Blow Molding Resin

American Plastic Lumber Inc

Blow Molding Resin

Melt Index: 0.30

Features

  • Good balance of physical and molding properties – hight toughness
  • Excellent process ability on high-speed, multiple-head blow molding lines
  • UL – 94HB listed

Additives

  • Process stabilizer

Density: 0.955

Applications

  • Household chemical bottles
  • Industrial chemical bottles
  • Automobile fluid bottles
  • Pharmaceutical bottles
  • Toys

BLOW MOLDING RESIN HB-L354-A

PROPERTIES
ASTM(1)
UNITS
TYPICAL VALUES (2)
Melt Index (3)
D 1238
g/10 min
0.30
Density
D792
g/cm3
0.955

Molded Plaque Properties

PROPERTIES
ASTM(1)
UNITS
TYPICAL VALUES (2)
Tensile Strength @ Yield
D638
MPa (psi)
31 (4 540)
Elongation @ Break
D 638
%
900
Flexural Modulus
D790
MPa (psi)
1 180 (175 000)
Softening Point (Vicat)
D1525
°C (°F)
125 (257)
ESCR, F50 (4)
D1693
h
48
Ion Impact (5)
D 256
J/cm (ft-lb/in)
2.7 (5.0)

Additional Info

  • Properties designated have been determined using methods which are in accordance with or substantially in accordance with the specified testing standards.
  • Typical Values represent average laboratory values and are intended as guides only, not as specifications.
  • Condition 190°C/2. 16kg.
  • Environmental stress crack resistance, Condition B, 100% lgepal.
  • 3.2 MM (0.125 in) thick specimen.

Source:
Novapol® polyethylene